聯係人: | 朱利珍 / 13003182846 / 13901743382 |
熱 線: | 021-59280969 / 021-59285155 / 021-59283712 |
郵 箱: | webmaster@czbhbj.com |
WHD型吊式橡膠隔振器是由金屬隔振元件組成,橡膠硬度分成不同等級以滿足不同承載能力,具有耐油、耐酸堿、耐高溫等性能。該產品阻尼比大,固有頻率低,安裝方便,對固體傳聲有明顯的降噪效果,主要適用於各種大小設備及管道的吊裝隔振。由於橡膠載荷範圍大,尤其適用於管道的重量、重心很難精確計算的場合。已使用於國家大劇院風管和設備吊裝隔振消聲。
WHD suspending rubber vibration absorber is composed of metal outline border and rubber vibration absorbing components.There are different grades of the rubber’s rigidity to meet different loading ability with the capability of resisting to grease,acid,alkali and high temperature.It has large damp ratio and low intrinsic vibration frequency,is convenient to install.It is effective in reducing noises of solid transaudient,is mainly applied for different type of suspending vibration absorbing for large and small equipment and pipelines.It is useful specially when the weight ofpipe and center ofgravity are hard to be calculated because ofthe rubber’S wide load scope.Have been applied to isolating vibration and reducing noise for air conduit and hoisting equipments in National Grand Theater.
WHD型吊式橡膠隔振器技術特性表
Technological characteristictable
規格 type | 承載範圍N load scope | 變形範圍(mm) distortion scope | 自振頻率(HZ) intrinsic vibration frequency | H(mm) | D(mm) | W(mm) | L(mm) | 絲杆直徑(mm) diameter of the screw |
WHD-10 | 50-150 | 5-10 | 10-7 | 100 | 50 | 50 | 46 | M8 |
WHD-20 | 100-300 | 5-10 | 10-7 | 100 | 50 | 50 | 46 | M8 |
WHD-30 | 150-450 | 5-10 | 10-7 | 100 | 50 | 50 | 46 | M8 |
WHD-40 | 200-600 | 5.5-10 | 9.5-7 | 100 | 50 | 50 | 46 | M8 |
WHD-80 | 400-1200 | 5.5-10 | 9.5-7 | 100 | 50 | 50 | 46 | M12 |
WHD-160 | 800-2400 | 5-10 | 10-7 | 100 | 60 | 60 | 46 | M12 |
WHD-320 | 1600-4800 | 5-10 | 10-7 | 120 | 80 | 80 | 56 | M14 |
WHD-640 | 3200-9600 | 5.5-10 | 9.5-7 | 120 | 80 | 80 | 56 | M16 |
WHD-1280 | 6400-19200 | 5-10 | 10-7 | 140 | 120 | 120 | 80 | M18 |
WHD-2560 | 12800-38400 | 5.5-10 | 9.5-7 | 140 | 120 | 120 | 80 | M24 |
WHD-D型吊式橡膠隔振器技術特性表
Technological characteristictable
規格 type | 承載範圍N load scope | 變形範圍(mm) distortion scope | 自振頻率(HZ) intrinsic vibration frequency | H(mm) | D(mm) | W(mm) | L(mm) | 絲杆直徑(mm) diameter of the screw |
WHD-D-10 | 50-150 | 5-10 | 10-7 | 80 | 40 | 70 | 42 | M10 |
WHD-D-20 | 100-300 | 5-10 | 10-7 | 80 | 40 | 70 | 42 | M10 |
WHD-D-40 | 200-600 | 5.5-10 | 9.5-7 | 80 | 40 | 70 | 42 | M10 |
WHD-D-80 | 400-1200 | 5.5-10 | 9.5-7 | 80 | 40 | 70 | 42 | M12 |
WHD-D-160 | 800-2400 | 5-10 | 10-7 | 105 | 55 | 90 | 56 | M12 |
WHD-D-320 | 1600-4800 | 5-10 | 10-7 | 105 | 55 | 90 | 56 | M14 |
WHD-D-640 | 3200-9600 | 5.5-10 | 9.5-7 | 105 | 55 | 90 | 56 | M16 |
WHD-D-1280 | 6400-19200 | 5-10 | 10-7 | 140 | 70 | 120 | 80 | M18 |
WHD-D-2560 | 12800-38400 | 5.5-10 | 9.5-7 | 140 | 70 | 120 | 80 | M24 |